spi

This chapter introduces the spi function of LuatOS. You can select the corresponding chip to view the tutorial.

• air101
  • Introduction
  • Hardware preparation
  • Software part
    • Read and write directly to the SPI channel
      • Initialize CS Pin Manual Control
      • Initialization SPI
      • Manufacturers and devices that read SPI FLASH ID
      • Erase specified address sector
      • Read and write SPI FLASH
      • Disable write enable and turn off the corresponding SPI channel and CS GPIO
    • Abstraction for a SPI device and then read and write
      • Abstract SPi Peripherals
      • Manufacturers and devices that read SPI FLASH ID
      • Erase specified address sector
      • Read and write SPI FLASH
      • Disable write enable and shut down the corresponding SPI channel
  • Full Code
• air103
  • Introduction
  • Hardware preparation
  • Software part
    • Read and write directly to the SPI channel
      • Initialize CS Pin Manual Control
      • Initialization SPI
      • Manufacturers and devices that read SPI FLASH ID
      • Erase specified address sector
      • Read and write SPI FLASH
      • Disable write enable and turn off the corresponding SPI channel and CS GPIO
    • Abstraction for a SPI device and then read and write
      • Abstract SPi Peripherals
      • Manufacturers and devices that read SPI FLASH ID
      • Erase specified address sector
      • Read and write SPI FLASH
      • Disable write enable and shut down the corresponding SPI channel
  • Full Code
• air105
  • Introduction
  • Hardware preparation
  • Software part
    • Read and write directly to the SPI channel
      • Initialize CS Pin Manual Control
      • Initialization SPI
      • Manufacturers and devices that read SPI FLASH ID
      • Erase specified address sector
      • Read and write SPI FLASH
      • Disable write enable and shut down the corresponding SPI channel
    • Abstraction for a SPI device and then read and write
      • Abstract SPi Peripherals
      • Manufacturers and devices that read SPI FLASH ID
      • Erase specified address sector
      • Read and write SPI FLASH
      • Disable write enable and shut down the corresponding SPI channel
  • Full Code