Air601 Hardware Data#
Module Hardware Data#
Profile |
Related Links |
|---|---|
Specification |
[Air601-12F_Module Product Specification_V1.2.pdf](https://cdn.openluat-luatcommunity.openluat.com/attachment/20230726105503590_Air601-12F_模块产品规格书 _V1.2.pdf) |
Hardware Design Manual |
[Air601-12F_WIFI Module Hardware Design Manual_V1.0.1.pdf](https://cdn.openluat-luatcommunity.openluat.com/attachment/20230619165631229_Air601-12F_WIFI模块硬件设计手册 _V1.0.1.pdf) |
Schematic and PCB Package |
|
Information on Development Board |
[Instructions for Use of Development Board EVB_Air601-12F V1.0.0.pdf](https://cdn.openluat-luatcommunity.openluat.com/attachment/20230626161923628_开发板EVB_Air601-12F使用说明 V1.0.0.pdf) EVB-Air601-12F.zip |
Module profile#
positive |
negative |
|---|---|
|
|
Pin Mapping Table#
GPIO Numbering |
Naming |
Default Features and Extended Features |
|---|---|---|
0 |
PA0 |
BOOT |
1 |
PA1 |
I2C_SCL/ADC0 |
4 |
PA4 |
I2C_SDA/ADC1 |
7 |
PA7 |
GPIO/PWM4 |
16 |
PB0 |
GPIO/PWM0/UART3_TX |
17 |
PB1 |
GPIO/PWM1/UART3_RX |
18 |
PB2 |
SPI_SCK/PWM2/UART2_TX |
19 |
PB3 |
SPI_MISO/PWM3/UART2_RX |
20 |
PB4 |
SPI_CS/UART4_TX |
21 |
PB5 |
SPI_MOSI/UART4_RX |
22 |
PB6 |
UART1_TX |
23 |
PB7 |
UART1_RX |
24 |
PB8 |
GPIO |
25 |
PB9 |
GPIO |
26 |
PB10 |
GPIO |
27 |
PB11 |
GPIO |
35 |
PB19 |
UART0_TX |
36 |
PB20 |
UART0_RX |
Only ‘BOOT’ and’ UART0_TX/RX’ are configured when starting up, other digital pins are GPIO pins, and the status is input high resistance.
ADC Number (LuatOS) |
Features |
|---|---|
0 |
Module ADC0-PA1 |
1 |
Module ADC1-PA4 |
adc.CH_CPU |
CPU Temperature |
adc.CH_VBAT |
Internal voltage |
RF pin#
As a hidden function, the RF pin of Air601 is: 8
When designing a PCB, this pin must be ESD protected.!!!
Functionally supports BLE 4.2 and wifi 2.4G communication, not supported wifi 5G