Air101 power consumption curve#
Test version#
LuatOS-SoC_V0007_AIR101.soc
Test Scenario \Main Frequency |
2M |
80M |
---|---|---|
No-load |
13.6406mA |
22.4846mA |
timer |
13.6728mA |
22.5383mA |
cyclic addition |
14.2334mA |
29.7260mA |
LIGHT |
2.0060mA |
2.0107mA |
DEEP |
11.5576uA |
11.6721uA |
Air101/Air103 There are multiple modes of operation
Mode |
Lua Code |
RAM Hold |
GPIO Hold |
RTC Clock |
Wake Mode |
---|---|---|---|---|---|
Normal |
Run |
Y |
Y |
Normal Run |
No Sleep |
LIGHT |
Pause |
Y |
Y |
Normal Run |
wakeup/rtc/dtimer |
DEEP |
Discard |
N |
N |
Normal Run |
wakeup/rtc/dtimer |
reset |
discard |
N |
N |
zero |
reset |
LIGHT and DEEP can be entered through
pm.request
, and rtc alarm clock or dtimer can be set before enteringIf the wakeup pin is pulled down all the time, the chip will not go to sleep.
LIGHT After the mode automatically wakes up, the Lua code continues to run
DEEP After the mode is automatically awakened, the Lua code will run from the beginning and all existing variable data will be lost.
2M main frequency#
No-load#
timer#
cyclic addition#
LIGHT#
DEEP#
80M main frequency#
No-load#
timer#
cyclic addition#
LIGHT#
DEEP#
Test scripts and test data files#
Air101 Power consumption test scripts and test data files.7z